We know very well that technique of cylinder head resurfacing can be done with grinding or milling.

Let’s look to analyze the two proceedings to understand better which are peculiarities that differentiate them.

PCD and CBN

Use of tools provided with sintered inserts, called PCD and CBN, has been widespread in latest years, becoming thus an alternative to classic processing to grinder or abrasive sectors.

PCD and CBN inserts are obtained thanks to sintering of Polycrystalline Diamond or Boro Cubic Nitride, on a metal matrix.

Fundamental property of PCD and CBN is extreme resistance to usury that allows a duration up to 30 times longer than traditional inserts in Widia or High Rapid Steel HSS.

Technique of processing also allows a high cutting and advancement speed and allows a deep removal of material, impossible to achieve with traditional system to abrasive grinder.

Inserts in PCD e CBN from 1/4" and 3/8" for cylinder head resurfacing
Inserts in PCD e CBN from 1/4″ and 3/8″

Grinding wheel and abrasive sectors

Grinders and abrasive sectors, however, are usually made for sintering of corundum or silicon carbide that present having different hardness and grain properties.

Another feature that makes grinding or milling different, it’s use of coolant liquid during leveling phase.

In fact, if use of abrasive makes necessary use of refrigerant during material removal, this isn’t necessary in case of PCD or CBN that work dry.

Use the stones for grinding or milling with the inserts
Abrasives sectors of different grain and shape

It’s better grinding or milling for cylinder head resurfacing?

Therefore, question if it it’s better a grinding or milling for cylinder head resurfacing, it’s legitimate than ever though misleading.

In fact, it isn’t possible to compare 2 apparently similar techniques of processing, but so different in substance.

However, we can say that processing with tool PCD or CBN is mainly indicated to those that level heads in a continuous and intense manner.

In fact, speed and depth of treatment allow to accelerate times of execution.

Widespread in America, leveling with tool it’s spreading considerably also in Europe.

American DCM Tech HB 3810 resurfacer with cutting plate for PCD or CBN for cylinder head resurfacing
American DCM Tech HB 3810 resurfacer with cutting plate for PCD or CBN for cylinder head resurfacing

For those that make a use more sporadic of their leveler, it’s advisable a processing with grinder or abrasive sectors.

In spite of longer times, due to lower removal depth and slower speed of advancement, costs of abrasives are considerably lower than PCD and CBN.

In addition, dressing that must be frequently done on grinders and sectors, allows to extend its existence until abrasive material it’s exhausted.

Carmec SG330 head resurface machine can be supplied with either abrasive sectors or with PCD or CBN (SG330M) and is ideal for cylinder head resurfacing
Carmec SG330 head resurface machine can be supplied with either abrasive sectors or with PCD or CBN (SG330M) and is ideal for cylinder head resurfacing

Conclusions

Then, say what’s better or worse it’s very complicated.
What is to be considered it’s above all use that operator wants to make of his cylinder head resurfacing machine.

Comment and share

Let us know your opinion, writing in the appropriate space for comments or contact us through the button below.

WRITE US

We also invite you to share the article on the various social networks using the social sharing buttons.

LEAVE A REPLY

Please enter your comment!
Please enter your name here